MARMOX Board SoundBoard – CS1 –
impact sound insulating

The special feature of MARMOX Board PRO – CS1 is the elastic foam rubber layer, that provides impact sound properties.

The value of impact sound reduction depends considerable from construction of the substructure and the flooring material:

substructure (e.g.: wooden beam or concrete ceiling)
flooring material (e.g.: cermaic tiles, vinyl flooring, carpet)

Test reports are available upon request.

MARMOX Board PRO - HD - druckfest

Dimensions

Standard dimensions

Product Thickness (mm) Width (mm) Length (mm)
MARMOX Board PRO CS1 – 6 6 600 1.000 / 1.250
MARMOX Board PRO CS1 – 10 10 600 1.000 / 1.250
MARMOX Board PRO CS1 – 12,5 12,5 600 1.000 / 1.250

Other dimensions upon request.

 

MARMOX Board PRO CS1 Verarbeitung

Installation

01.The substrate should be levelled, oil- and dust free, dry and stable. It’s important to install the edge insulating strips carefully. MARMOX Board PRO – CS1 have to be laid out with staggered joints, the foam rubber at the bottom side.

02. Cover the joints with a self adhesive tape to avoid the risk of leakage for later applied glue or self levelling compound. Apply a glass fibre mesh (e.g.: 10 x 5 mm) on the total area, embedded into flexible cement based tile adhesive.

03. Option: the application of a 4 mm thick cement based self levelling compound on the prepared floor will increase the efficiency of impact sound reduction.

04. Ready for the application of flooring material (e.g.: vinyl flooring, tiles, carpet, laminat).