MARMOX Board PRO - CS1 -
impact sound insulating
The special feature of MARMOX Board PRO - CS1 is the elastic foam rubber layer, that provides impact sound properties.
The value of impact sound reduction depends considerable from construction of the substructure and the flooring material:
substructure (e.g.: wooden beam or concrete ceiling)
flooring material (e.g.: cermaic tiles, vinyl flooring, carpet)
Test reports are available upon request.
Dimensions
Standard dimensions
| Product | Thickness (mm) | Width (mm) | Length (mm) |
|---|---|---|---|
| MARMOX Board PRO CS1 - 6 | 6 | 600 | 1.000 / 1.250 |
| MARMOX Board PRO CS1 - 10 | 10 | 600 | 1.000 / 1.250 |
| MARMOX Board PRO CS1 - 12,5 | 12,5 | 600 | 1.000 / 1.250 |
Other dimensions upon request.
Installation
01.The substrate should be levelled, oil- and dust free, dry and stable. It’s important to install the edge insulating strips carefully.
MARMOX Board PRO - CS1 have to be laid out with staggered joints, the foam rubber at the bottom side.
02. Cover the joints with a self adhesive tape to avoid the risk of leakage for later applied glue or self levelling compound.
Apply a glass fibre mesh (e.g.: 10 x 5 mm) on the total area, embedded into flexible cement based tile adhesive.
03. Option: the application of a 4 mm thick cement based self levelling compound on the prepared floor will increase the efficiency of impact sound reduction.
04. Ready for the application of flooring material (e.g.: vinyl flooring, tiles, carpet, laminat).