MARMOX Board PRO / ULTRA –
Accessories
ACC001 – reinforcing fibre mesh tape 25 m x 100 mm
The tape is used to reinforce the joints between the boards and should be embedded into flexible tiles adhesive.
packing unit = 2 rolls/bag
ACC002 – sealing tape 10 m x 125 mm
Sealing tapes are used to seal joints and feedthroughs.
packing unit = 2 rolls/bag
ACC003 – preformed sealing tape for inside-/outside corner
Preformed sealing corners will allow easily sealing of corners.
packing unit = 2 corner/bag
ACC004 – washer
Available made of zinc coated metal or plastic for strong and save mechanical fixing with screws or nails.
packing unit = 20 pcs./bag
ACC005 – wall bracket
Wall brackets are used for connection boards on wall or floor.
packing unit = 2 pcs./bag
ACC006 – perpendicular bracket
Perpendicular brackets are used to set two perpendicular boards in the right positon until the glue dries.
packing unit = 2 pcs./bag
ACC007 – joint brackets
Joint brackets are used to connect two boards together on-line.
packing unit = 2 pcs./bag
ACC008 – water proof mortar
This waterproof cement mortar is suitable to glue sealing tape and reinforcing mesh.
packing unit = 5 kg/bag
ACC010 – 1 K – PU Adhesive Sealant Cartridge
The 1 K – PU mastic adhesive bonding and sealant will guarantee a solid, fast, and perfect sealing for boards and accessories.
packing unit = 12 cartridges/carton
ACC012 – sealing fleece
The waterproof MARMOX sealing fleece is designed from a polyester layer and a layer of thermoplastic elastomer. The fleece is suitable for application on walls and floors and ready to tile. It achieves a perfect waterproof underlay. Dimensions: 2.500 x 950 mm.
packing unit = 1 pcs./unit
ACC013 – adjustable leg
The adjustable legs are recommended to adjust vertically installed boards (e.g. bath tub covering) in their height.
packing unit = 2 pcs./bag